Bruker TruLive3D
Training manual for the Bruker TruLive3D Light Sheet Microscope
Bruker TruLive3D training protocol
Training Program Bruker TruLive3D Light Sheet Microscope Session 1 – Instrument and Operat...
Bruker TruLive3D specifications and primary uses
Bruker TruLive3D main specifications The TruLive3D has 4 imaging channels at 405nm, 488nm, 561...
1. Bruker TruLive3D start-up procedure
a. Turn on the microscope In case of emergency, push the big red button: it turns off ...
2. Bruker TruLive3D microscope overview
a. The Bruker TruLive3D is a dual sided illumination light sheet microscope. The dual light she...
3. Bruker TruLive3D Lux-Bundle overview
Once the microscope, cameras and temperature controller and gas mixer are on it is time to op...
4. Bruker Trulive3D calibration
Calibration of the laser beams is critical for optimal imaging and should be done prior to ever...
5. Bruker TruLive3D Finding the sample
Make sure you performed the calibration of the system before lowering your sample in the chambe...
6. Bruker TruLive3D Experiment
This page will guide through the steps to set-up a basic experiment. 1. Setting up an experime...
7. Bruker TruLive3D Data management
Data acquired on the Bruker TrLive3D will typically be very large, on the order of TeraBytes of...
8. Bruker TruLive3D Using the photo-manipulation (PM) feature
The Bruker TruLive3D has a photo-manipulation (PM) feature that you can use to ablate specific ...
9. Bruker TruLive3D shut-down procedure
Once you are done with your experiment, please proceed with the following shut-down procedure: ...
Bruker TruLive3D Sample preparation guidelines
This page contains some tips for sample preparation for the Bruker Trulive 3D. It is not exhausti...
Bruker TruLive3D emission filters and fluorophores spectrum
This page will help you select which filter combination you need for most commonly used fluorop...